The world faces the challenge of climatic change and resources scarcity. Therefore, each household should be geared towards cutting down their spending in order to save a lot for the future or harsh moments. Reducing water bill is one of the ways through which families can rescue some amount of money which is regularly spent but can be saved.
How Can You Reduce your Water Bills?
There are several ways through which you can reduce water bills in your household. These methods mainly emphasize on water conservation. At the same time, they emphasize on proper water utilization without unnecessary wastage at home.
1. Fix Leaks
Large amount of water is wasted through leaks. At some point, we tend to ignore small leaks which give way for a few drops of water. However, these drops of water amount to several gallons of water which is wasted on daily, weekly, and later monthly basis.
By fixing the leaks, you will be able to block all the ways through which water is lost. You may consider doing this by yourself. However, if it requires top skills, consider contracting a plumber in order to prevent recurrent leaks.
2. Install Low-flow or Rain Showerheads
Showerheads create room for loss of a lot of water. Normally, showerhead splashes water in larger dimensions than that of the body. This leads to flow of water which does not get used in any way.
At the same time, high-flow showerheads losses large volume of water by allowing water to run through them at a fast speed. To avoid this, be sure to install low-flow and rain showerhead. Rain showerhead atomizes the water droplets as it changes its temperature naturally. This creates a significant change in your bills.
3. Use Dual Flush Toilets
Toilets spend almost a quarter on the total water spend in a household per day. Using single flush toilet may translate into high water bills. Single flush toilets have the same flush mode for long and short call. Thus, the same amount of water is used for these two reasons.
A dual flush toilet has two flush modes. One is meant for long calls while the other one is meant for short calls. The modes differ in the amount of water spent for the two purposes. Therefore, a dual flush toilet helps you to save a considerable amount of water that is spent for toilet purposes.
4. Consider Washing Full Loads of Dishes or Laundry
Washing too often usually leads to water wastage. Therefore, concentrate on washing your clothes or utensils as full loads. You may choose to wash your dishes once per day. For laundry, you may choose a day or two for the entire week. This will help in conserving water and reducing its bills.
5. Turn-off Water when not in Use
Normally while performing some tasks such as: shaving, brushing the teeth, bathing, and rinsing clothes or utensils, we usually forget to turn off the water. This creates a room for water to run into waste without any use. In a bid to control this, always be sure to turn off the taps whenever you are not necessarily fetching water or directly using it.
Water is the center of life. Therefore, water bills are unavoidable. However, it is possible to control the normal heights that our water bills usually take. By employing different water conservation means as well as prevention of water loss through leaks, it is possible for you to make a significant change in your water bills.